Tag: porcelanato

Fixed dental prosthesis in pure 3D translucent zirconia

Among the latest material options for making a fixed prosthesis for a full arch implant, total implant or protocol prosthesis, we now have an innovative technique full of advantages: 3D pure translucent zirconia. Zirconia is currently the most modern material for both full and partial dental implant prostheses. It is also the most suitable material for dental crowns on single implants or fixed prostheses.

Zirconia dentures combine beauty and strength

Pure zirconia is also known as cubic zirconia, translucent zirconia, monolithic zirconia and black zirconia. It is currently considered the most modern and resistant material for making dental crowns.

Dental prostheses made from this material are fixed onto dental implants previously placed in the upper or lower jaw.

In order to offer patients the most modern treatments, the ImplArt dental clinic has once again innovated by pioneering the best European technology (Austria) to manufacture 3D zirconia dental prostheses in its own laboratory.

Its modern manufacturing allows treatment to be carried out using 100% computerized techniques, with complete digital planning of the case. This means more comfortable treatment for the patient, much more predictable, and above all, faster.

Translucent Zirconia — *The translucent zirconia protocol prosthesis is completely white and contains no metal inside. As a result, the colors and shapes are more beautiful and natural.*

Planning 3D zirconia implant/prosthesis treatment

For a complete treatment with dental implants, there must first be an extensive conversation between the dental surgeon and the patient. The definition of the total treatment takes place in 3 stages:

1- Firstly: Planning the surgical and prosthetic aspects of the all-tooth or partial implant case. First of all, the patient’s needs are studied, with a clinical assessment and radiological examinations, so that the case can be planned precisely before it is carried out.
2- Secondly: Performing the surgery to install the dental implants. At this point, a temporary transition prosthesis for the full arch should also be installed.
3- Thirdly: Preparation of the final dental prosthesis. Once the implants have healed, the long-awaited making of the complete prosthesis begins, according to the material chosen by the patient at the start of their treatment.

Gumless dental zirconia prosthesis. — *Zirconia dental prosthesis without gums. In some cases it is possible to make a zirconia dental prosthesis without the pink gum layer. In an acrylic dental protocol this would not be possible.*

Not all protocol prostheses are the same and made of acrylic!

The choice of implant prosthesis material

Nowadays, you can choose from a variety of materials for fixed prostheses on implants (dental protocols). In the past, there were only metal-ceramics (metal structure and porcelain exterior) and acrylic (resin), made by hand.

Today, ImplArt is able to offer patients options with extreme resistance and superior aesthetics, such as computer-engineered translucent zirconia. In this sense, each type of prosthetic material can have an impact on the patient’s treatment in terms of price, preparation time and the final aesthetics of the total implant.

Therefore, in this article, we will explain the most modern model of fixed prosthesis on implants: the computerized translucent zirconia prosthesis, as well as its advantages and characteristics.

What is 3D dental zirconia? Zirconia is a white material that has the strength of a metal

Types of zirconia prosthesis for dental protocols

Today there are three types of dental zirconia to better perform protocol prostheses on implants (fixed dental prostheses), namely :

1. milky whitezirconia structure (lower volume), together with applied porcelain overlay (higher volume)
2. 3Dtranslucent zirconia prosthesis (larger volume), i.e. with a small application of porcelain on the outside of the teeth (smaller volume)
3.3D monolithic pure zirconia prosthesis (full volume) with make-up, so no additional porcelain applied

zirconia prosthesis being manufactured — *The aesthetics of aesthetic zirconia fixed prostheses are unbeatable. Notice how translucent the material is and how beautiful and natural it looks.*

What does the 3D translucent pure zirconia implant prosthesis look like?

In this type of zirconia prosthesis, there is only a small porcelain overlay on the structural part of the prosthesis. In short, the entire final process of making the monolithic zirconia prosthesis is done by computer programs and robotic machines( Digital Dentistry).

Therefore, we are sure that the fittings will be perfect, the anatomy will be that of natural teeth, and the colors will be realistic.

zirconia and translucency prosthesis — Dental zirconia protocol. Note that there is a small layer of translucent porcelain on the outside of the tooth to give it more shine, better color and more translucency. The rest of the prosthesis is solid and made of pure zirconia that has been tinted to match the natural color of the tooth and gums. The holes will be closed after the fixed prosthesis has been installed.

Advantages of the 3D zirconia protocol prosthesis

In contrast to metal as a structure, the main advantages of translucent zirconia are its biocompatibility, excellent aesthetics and extreme resistance. Zirconia, with the white structural part of the dental prosthesis, undeniably enhances the natural cosmetic characteristics of porcelain.

In fact, dental zirconia is exceptionally strong and durable as a base. So much so that the use of small portions of porcelain over this translucent zirconia structure provides complementary aesthetics for the complete implant.

In addition, zirconia is a super biocompatible and anti-allergenic material and is also used in white dental implant posts.

zirconia dental prosthesis internal structure — The structure of the zirconia dental prosthesis is white and, at this stage, not yet colored or shiny. In the next phase of the prosthetic work in our dental laboratory, the piece will come to life with the pigmentation of teeth and gums. The final colors depend on the consensus between the person’s taste and the dentist’s opinion. However, you can virtually choose any color from the available range. The most commonly used shades for porcelain zirconia teeth are B1, A1, BL4, A2, B2. For the gums, we try to follow the color of the patient’s natural gums, with the most common colors being STG4, STG5 and STG8.

zirconia fixed dental prosthesis — *Zirconia prosthesis with aesthetic ceramic application, ready to be installed on the implants*

Superior aesthetics of 3DZirconia

Dental zirconia can be custom-made in such a way that it resembles the enamel and gum tissues, thus optimizing the aesthetic result.

Translucent dental zirconia is undeniably the best material for fixed prostheses on implants, as it offers translucency, naturalness and strength as a result.

First of all, it should be noted that the zirconia protocol prosthesis makes no noise when chewed, is not heavy, nor does it damage dental implants, and certainly not opposing teeth.

Translucent dental zirconia is a material that above all does not change color, does not stain and therefore does not wear out with use.

multlayer zirconia crowns — *Observe the natural anatomical details of the finished porcelain and zirconia fixed dental prosthesis. This work is done in our in-house digital dental laboratory.*

How are 3D translucent zirconia dentures made?

The ImplArt Clinic has all the infrastructure to make your zirconia fixed prosthesis in its own laboratory. Here’s how it works: a zirconia dental prosthesis is manufactured using computerized processes, starting with the milling of a solid block of zirconia.

Above all, because it is a CAD-CAM (computerized) job, your dental project is stored in our laboratory, so the original project can be printed again quickly, should the need arise.

Maintenance of fixed 3D translucent zirconia dental implants

First and foremost, zirconia is extremely resistant and is certainly the strongest material for dental use. As such, its resistance is superior to porcelain and, of course, resin.

Maintenance for a zirconia prosthesis involves a visit to the dentist every 6 months for prophylaxis, in order to monitor oral health in the same way as recommended for all other patients.

The risk of the prosthesis fracturing is, above all, very rare, due to a characteristic of the material.

With regard to the color and shape of the teeth, these remain unchanged over time, making the material an excellent choice for its durability and, above all, long-term aesthetics.

It is always important to remember that, once treatment is complete, you should visit your dentist every 6 months for prophylaxis and to monitor the results of your treatment.

Agende sua consulta agora por WhatsApp

Dental clinic near you in São Paulo

If you are looking for a modern dental clinic, Clinica Dentaria ImplArt was made for you! With high technology and modern facilities, we can carry out your dental implant treatment, dental contact lens, protocol prosthesis, or computerized dental crown, with comfort, safety and well-being.

Finally a top dental clinic

ImplArt Odontologia is primarily one of the most highly regarded dental technology clinics in the world, having been voted the best dental implant clinic in Brazil, according to the GCR, Global Clinic Rating.

The ImplArt Clinic has been awarded first place among dental clinics in Brazil, as a result of the recognition of its expertise in Digital Dentistry, Modern Structure and Patient Satisfaction. The GCR Score (Global Clinic Rating) is an international organization created to provide evaluations of 432,000 medical and dental clinics around the world, so as to indicate those that develop the best practices. First of all, it is important to mention that more than 128,277 dental clinics in the world have been evaluated, 603 of them in Brazil. This is certainly a criterion of great importance and relevance to dentistry worldwide.

High standards, knowledge, experience, responsibility, transparency, biosafety and trust, close to you!

We are located in one of the most privileged areas of São Paulo Downtown in the Bela Vista neighborhood, close to Avenida Paulista in Paraíso and the Brigadeiro (green line) and Vergueiro (blue line) subways. Easy access via Av. vinte e três de maio (north-south corridor).

Today we have close to thousands of implants installed, thousands of dental prostheses, hundreds of cosmetic dentistry cases solved and thousands of satisfied patients. These certifications certainly enable us to deal with the most difficult cases in dental aesthetics, oral rehabilitation, orthodontics and dental implants.

Digital dentistry is the highlight of the ImplArt dental clinic.

The procedures offered at the ImplArt dental clinic are in line with the latest advances in dentistry worldwide. We can guarantee this high standard by the constant trips of our scientific coordinator, implant dentist Dr. Roberto Markarian, to conferences and meetings not only in the United States, but also in Europe.

Just to give you an example, the materials and techniques used in our clinic are the same as those used in the best dental clinics in the world. We only work with the best, in order to offer you the best result with the greatest safety.

The main highlights of our special treatments are:

Complete in-houseradiology and diagnosticscenter (X-ray and CT scan)
Owndental laboratory
Advanced ceramic materials, such as zirconia and E.max
Molding systems with intraoral scanners (digital molding without putty)
Computerized milling machines for designing and producing teeth (3D printers)
Digital smile planning
Day Clinic – quick treatments
Large structure and equipment – 6 complete service rooms
One Stop Clinic – all dental specialties in one place
Humanized treatment – the search for an understanding of the human being and their needs
High expertise and technical standards in complex implant treatments, aesthetics as well as oral rehabilitation and gum surgery

The modern facilities of the ImplArt Dental Clinic in São Paulo, in a central location close to Avenida Paulista and with easy access even if you come from afar.

Get to know our dental clinic

Here at our dental clinic, you are certainly our top priority. Our team, under the responsibility of implant dentist Dr. Roberto Markarian, has been trained to offer you personalized treatment, above all with the quality you deserve. Thank you in advance for entrusting us with your oral health, and we look forward to seeing you soon.

Visit the other pages of our website to find out more about our modern treatments such as prosthetic protocols, dental contact lenses, implants, as well as our technology and philosophy.

If you don’t live near São Paulo/SP Brazil, please contact us for prior planning with Day Clinic. If you have any questions about price, cost or the best treatment, please contact us through one of the channels below or book an appointment with us.

Agende sua consulta agora por WhatsApp

Easy to get to dental clinic – on Avenida Paulista

Pure porcelain crown for highly aesthetic implants

The digital all-porcelain crown is a highly efficient ceramic system used to make prosthetic crowns for dental implants.

What are digital pure porcelain crowns made of?

Lithium disilicate ceramics have aesthetic and resistance properties comparable to natural teeth. They are the best and most technologically advanced materials for achieving aesthetic teeth because they are white and translucent, which makes the crown look natural even in the brightest of environments.

e.max ceramic was developed for use in Digital Dentistry Systems, with a 3D printer that sculpts dental prostheses. With this system, the all-porcelain crown can be made quickly, with more strength and naturalness than other materials made by hand.

*Cemented pure porcelain crown indicated for cases with a greater need for aesthetics*

What is the best material for pure porcelain digital prostheses?

The digital porcelain crown is made as a monoblock, i.e. it has no internal reinforcement layers, as the computer will create the crown from a prefabricated block of dental porcelain.

The Pura Digital porcelain crown is an evolution in the materials used in dental prostheses. With it, it is possible to reproduce details that make the prosthesis similar to natural teeth. With the Cerec System, the e.max crown is made more quickly and precisely, because it is designed on a computer and sculpted by robots.

The main advantages of modern porcelain crowns:

High resistance to dental fracture and durability;
Very aesthetic look, comparable to a natural tooth;
Range of blocks with different colors and types of resistance for different uses;
Stain-resistant material;
It can be made using the Metal Free technique (no metal in the internal structure). This makes the crown look translucent and much more aesthetic in bright environments.
It can be designed and built quickly thanks to the Cerec system.

To make digitalpure porcelain crowns , we use CAD/CAM techniques:

1 – Intraoral scanner: It all starts with the digital molding of the dental implant with a high-precision color camera that takes images of the oral interior and sends them to the computer.

2 – Computer and software: receives the information captured by the intraoral scanner and carries out the simulation and personalized planning of the dental crown using three-dimensional images.

3 – Machine manufacturing: robots mill the e.max ceramic block based on the computerized design until the shape of the crown is achieved. The result is certainly a piece that is strictly compatible with the patient’s needs.

It is common for a temporary crown to be made before finalizing the permanent tooth to test whether the computer modeling is correct. Immediately after milling, the piece undergoes a crystallization process at approximately 850°C for 20 to 30 minutes and acquires high resistance, shade and translucency.

When the crown is finished, it is attached to the previously installed dental implant. For your convenience, the Cerec System and e.max ceramics are available at ImplArt Dental Clinic in Brazil. As an alternative to the pure porcelain crown, we now have an even more resistant material, translucent pure zirconia.

If you have any questions about this or other techniques and prices, please make an appointment or contact us. We are located in the Paulista Avenue area/Downtown of São Paulo. We will be happy to assist you.

Agende sua consulta agora por WhatsApp